Wood fences are a lovely and often necessary addition to any person’s yard, but how do you go about setting wood fence posts? Here are some key tips that will save you time, money and effort.

Before doing anything, you will want to place your wood fence posts in wood preservative. But only saturate the bottom third of each post, as that is the section that will go underground. Then, you will space the posts.

Generally, posts should be spaced 6’ to 8’ apart. If you’re unsure of the exact spacing that you will need, just think about what your use is for your fence. Then set the corner (or end) post – and align the rest of the posts (with a line) accordingly. Dig stakes into the ground where the posts will eventually go. This particular process is very important because it is here that you are building the fence’s foundation. Make sure to carefully measure and plot out your fence.

Now it is time to actually set the wood fence posts. A third of each post should be inched into the ground at each stake marker. However, before doing this, place a stone or two shovels of gravel into each hole. Rocks will absorb the moisture so the soil won’t collect as much of it and hence, will be stronger. As well, to anchor the posts better, make sure you dig your holes so they are larger at the bottom than at the top. Finally, you can place the posts into the ground.

Wood Fence PostsEnsure that the posts are sitting firmly in the ground and are upright (use a level). Brace them with stakes and gradually remove the brace nails as the posts settle. Build mounds of dirt around the posts too, as this further secures them. Always remember to pay special attention to your corner posts.

Wait several days before adding rails. After the wood fence posts have properly settled, you can then nail bottom and top rails to each post. This step is not easy and you might want to ask for a helping hand.

Next you’ll have to choose a style for your fence. Whatever style you prefer, you’ll then have to acquire certain materials to finish constructing your fence. This process is the most technical. Determine the purpose of your fence and then choose the style that is most necessary – do you want just a plain barrier or a more decorative, private fence? Consult further instructions for styling.

Lastly , talk to your neighbors if you’re not sure where exactly to build your fence!

You don’t want to intrude on their property. As well, your city might have some construction codes and you’ll want to investigate them so as not to be in violation.